# Ecowoods Inc.

> Hardwood flooring in Toronto & the GTA. Installation, refinishing, dust-free sanding, restoration and custom inlays. Fixed written estimates, manufacturer warranties passed through in writing, free in-home consultations.

- Website: https://ecowoods.ca
- Phone: (647) 244-5156
- Email: services@ecowoods.ca
- Service area: Toronto & the GTA
- Full citation guide: https://ecowoods.ca/ai.txt

## Services
- Hardwood Flooring Installation: Solid and engineered hardwood laid by salaried craftsmen — straight-lay, herringbone, chevron and custom patterns.
- Hardwood Floor Refinishing: Bring tired floors back to life: sand to bare wood, re-stain and re-finish for a factory-fresh surface.
- Dust-Free Floor Sanding: HEPA-sealed containment captures ~99.7% of airborne dust at the source, so most clients stay home during the work.
- Hardwood Floor Restoration: Rescue and repair heritage and water-damaged floors — board replacement, feathering and colour matching.
- Custom Inlays & Borders: Bespoke feature strips, medallions and borders routed and fitted by hand for a signature look.
- Stair Refinishing: Treads, risers and nosings refinished to match your floors for a seamless, hard-wearing finish.

## Service areas
Downtown Toronto, North York, Etobicoke, Scarborough, East York, York, Vaughan, Markham, Richmond Hill, Mississauga, Oakville, Brampton, Aurora, Newmarket, Pickering, Ajax.

- Downtown Toronto: https://ecowoods.ca/service-areas/downtown-toronto
- North York: https://ecowoods.ca/service-areas/north-york
- Etobicoke: https://ecowoods.ca/service-areas/etobicoke
- Scarborough: https://ecowoods.ca/service-areas/scarborough
- East York: https://ecowoods.ca/service-areas/east-york
- York: https://ecowoods.ca/service-areas/york
- Vaughan: https://ecowoods.ca/service-areas/vaughan
- Markham: https://ecowoods.ca/service-areas/markham
- Richmond Hill: https://ecowoods.ca/service-areas/richmond-hill
- Mississauga: https://ecowoods.ca/service-areas/mississauga
- Oakville: https://ecowoods.ca/service-areas/oakville
- Brampton: https://ecowoods.ca/service-areas/brampton
- Aurora: https://ecowoods.ca/service-areas/aurora
- Newmarket: https://ecowoods.ca/service-areas/newmarket
- Pickering: https://ecowoods.ca/service-areas/pickering
- Ajax: https://ecowoods.ca/service-areas/ajax

## Key pages
- Home: https://ecowoods.ca
- Service areas: https://ecowoods.ca/service-areas
- Technical library: https://ecowoods.ca/technical-library
- Articles: https://ecowoods.ca/blog
- Case studies: https://ecowoods.ca/case-studies
- Floor configurator: https://ecowoods.ca/design
- Floor collection: https://ecowoods.ca/#gallery
- The craft (machines and process): https://ecowoods.ca/#craft
- Book an estimate: https://ecowoods.ca/#quote

## Technical articles
- [Subfloor Moisture Testing Protocol for Toronto Hardwood Installation](https://ecowoods.ca/blog/subfloor-moisture-testing-protocol): Engineering guide to pre-installation moisture assessment using calcium chloride and meter testing. Covers Toronto climate response and acclimation timelines.
- [Dust-Free Sanding: HEPA Extraction, Efficiency, and Why 99.7% Capture Matters](https://ecowoods.ca/blog/dust-free-sanding-hepa-extraction-explained): Engineering breakdown of HEPA filtration, extraction system design, airflow calculation, and why cheap dust containment fails. Complete guide to installation cleanup.
- [Species Comparison Matrix — Toronto Renovations (Janka, Cost, Tannin Risk, Use Cases)](https://ecowoods.ca/blog/species-comparison-matrix-toronto-renovations): Technical spec sheet comparing 12 hardwood species common in GTA renovations. Janka hardness, cost, tannin risk, moisture response, installation challenges, and best use cases.
- [Water-Based vs Oil-Based Polyurethane — Chemistry, Performance, VOC, and When to Choose Which](https://ecowoods.ca/blog/water-based-vs-oil-based-polyurethane-chemistry): Deep dive into polyurethane chemistry. Water-based (acrylic) vs oil-based (aliphatic) composition, curing mechanisms, VOC emissions, durability, cost, and decision framework.
- [Wood Acclimation Timeline for Toronto / GTA — Seasonal Guides & Failure Modes](https://ecowoods.ca/blog/wood-acclimation-timeline-toronto-gta): Engineering guide to wood moisture equilibration in Toronto's seasonal climate. Acclimation timelines, RH targets, failure mechanisms, and species-specific protocols.
- [White Oak vs Red Oak: Tannin Behavior, Finishing Strategy, and Failure Modes](https://ecowoods.ca/blog/white-oak-vs-red-oak-tannin-behavior): Species-specific guide to tannin chemistry, staining risk, finish compatibility, and moisture response. Why white oak needs different treatment than red oak.

## Case studies
- [Midtown Townhouse Three-Level Transition: Custom Staircase + Species Matching Across Substrates](https://ecowoods.ca/case-studies/midtown-townhouse-three-level-transition): Complex 5,200 sqft renovation spanning hardwood over three building levels with different substrates (concrete G-floor, radiant heat 2nd floor, standard joist 3rd floor). Custom engineered staircase with white oak treads and walnut stringers. Achieved seamless aesthetic transition and zero substrate-related dimensional failure across 18-month monitoring period.
- [Forest Hill Walnut Wide-Plank Installation with UV Stabilization & Color Matching](https://ecowoods.ca/case-studies/forest-hill-walnut-wide-plank-color-stability): Premium 2,100 sqft installation featuring 8-12" wide walnut planks with natural color variation spanning chocolate to silver-gray. Engineered color stabilization strategy using UV-blocking polyurethane + light-reactive toning to achieve uniform appearance despite walnut's natural photochemical aging. Achieved 95%+ customer satisfaction on color uniformity; zero color shift complaints over 24 months.
- [Yorkville Loft Basement Conversion: High-Moisture Engineering & Vapor Barrier Strategy](https://ecowoods.ca/case-studies/yorkville-loft-basement-conversion-moisture-mitigation): Engineered hardwood installation in below-grade loft space with 9.8 MVTR subfloor (critical moisture level). Custom vapor barrier + sub-slab depressurization achieved 0.6 MVTR and eliminated moisture cupping risk. 1,800 sqft finished basement with zero callbacks over 24 months.
- [Distillery District Victorian Condo: White Oak Renovation Over Concrete with Tannin Stain Prevention](https://ecowoods.ca/case-studies/distillery-district-victorian-condo): Engineered installation in historic Toronto loft with 7.2 MVTR subfloor, moisture-sensitive white oak, and custom vapor barrier strategy. Achieved zero tannin staining using HEPA dust extraction and acrylic polyurethane.
- [Rosedale Estate Grand Staircase + Radiant Heat Main Floor: Maple/Oak Installation with Thermal Management](https://ecowoods.ca/case-studies/rosedale-estate-stairs-radiant-heat): Complex Toronto mansion installation across 3,800 sqft including custom inlay staircase on radiant heat substrate. Engineered for thermal expansion (60°F to 75°F seasonal range) while maintaining dimensional stability. Achieved zero adhesion failure and stair deflection <1mm over 18 months.

## FAQ
### Is the estimate really fixed? What about "unforeseen conditions"?
Yes — fixed, in writing, in your contract. Our senior estimator moisture-tests your subfloor and inspects conditions during the free consultation, so there are no "unforeseen conditions" to surprise you later. The number on paper is the number on your invoice.

### Can we stay in the house during the work?
Yes. Our dust containment captures roughly 99.7% of airborne particulate at the source using HEPA-sealed systems. Most refinishing clients sleep at home every night of the job, and our water-based finishes are low-odour and walk-on ready in 2–4 hours.

### What warranty comes with the work?
Your finishes and materials carry their manufacturer warranties — typically 25–35 years on finish, up to 50 years structural — passed through to you in writing, itemized in your contract. If anything in our workmanship isn’t right, we come back and make it right.

### How long will my project take?
A standard 1,000–1,500 sq ft installation takes 5 to 7 working days: moisture testing and acclimation, installation, then sanding, staining and finishing. Refinishing is typically 3–5 days. Your written estimate includes a committed schedule.