American Sanders B-2 +DC
Seven-inch edger with dust collection, on a standard circuit.
What decides whether it runs
Electrical requirement
| Supply | 115 V / 60 Hz, 1 phase |
|---|---|
| Power | 1.3 kW |
| Current | 12 A |
| Minimum fuse | not published |
| Connector | none specified |
The rest of it
Mechanical
| Category | edger |
|---|---|
| Weight | 14.5 kg |
| Drum or disc | 178 mm |
| Speed | 2800 rpm |
| Abrasive | 7 in disc |
| Dust | on board bag |
The part other spec pages leave out
What American Sanders does not publish
- Horsepower, and the dust control rate in CFM.
- A price. No manufacturer in this category publishes one, so this page shows none.
- Any productivity figure. There is no manufacturer-published square-feet-per-hour rating for this machine, so there is nothing here to quote.
Next
Put it on a circuit
The circuit planner takes this machine and whatever else would be running beside it and does the arithmetic against the breaker you actually have.