Project write-ups documenting how we handle moisture, substrates, species, and finishes on Toronto homes.
At a glance
Neighbourhood, size, substrate, species, and the measurement each job turned on.
Midtown TorontoToronto
Three levels, three different substrates, one continuous floor — the ground-floor slab sealed and re-measured before a single board was laid.
G-Floor MVTR (Post-Epoxy Sealer)4.8lbs/1000 sqft/24h
Read what was measuredForest HillToronto
Wide-plank walnut sorted board by board for colour, with the rejected stock counted and published rather than absorbed quietly.
Walnut Stock Yield97%
Read what was measuredYorkvilleToronto
Hardwood below grade on a slab reading double the safe threshold — mitigated, re-measured, and only then installed.
Initial Subfloor MVTR9.8lbs/1000 sqft/24h
Read what was measuredRosedaleToronto
A grand staircase and a main floor over radiant heat, with moisture content re-checked six months later through a Toronto winter.
Subfloor MVTR2.1lbs/1000 sqft/24h
Read what was measuredDistillery DistrictToronto
White oak over a historic concrete slab, with the tannin risk handled in the finish schedule rather than discovered afterwards.
Subfloor MVTR (before barrier)7.2lbs/1000 sqft/24h
Read what was measuredEvery one of these is a published case study with its readings, its protocol and its failures in it — all of them are here.
Complex 5,200 sqft renovation spanning hardwood over three building levels with different substrates (concrete G-floor, radiant heat 2nd floor, standard joist 3rd floor). Custom engineered staircase with white oak treads and walnut stringers. Achieved seamless aesthetic transition and zero substrate-related dimensional failure across 18-month monitoring period.
Toronto, ON5,200 sqftHard Maple (ground floor) · Red Oak (second floor) · White Oak (stairs) · Walnut (stair stringers)August 1, 2026renovationPremium 2,100 sqft installation featuring 8-12" wide walnut planks with natural color variation spanning chocolate to silver-gray. Engineered color stabilization strategy using UV-blocking polyurethane + light-reactive toning to achieve uniform appearance despite walnut's natural photochemical aging. Zero colour-shift complaints over 24 months.
Toronto, ON2,100 sqftBlack WalnutAugust 1, 2026renovationEngineered hardwood installation in below-grade loft space with 9.8 MVTR subfloor (critical moisture level). Custom vapor barrier + sub-slab depressurization achieved 0.6 MVTR and eliminated moisture cupping risk. 1,800 sqft finished basement with zero callbacks over 24 months.
Toronto, ON1,800 sqftRed Oak (main area), Hard Maple (accent stripes)August 1, 2026renovationEngineered installation in historic Toronto loft with 7.2 MVTR subfloor, moisture-sensitive white oak, and custom vapor barrier strategy. Achieved zero tannin staining using HEPA dust extraction and acrylic polyurethane.
Toronto, ON2,400 sqftWhite OakAugust 1, 2026residentialComplex Toronto mansion installation across 3,800 sqft including custom inlay staircase on radiant heat substrate. Engineered for thermal expansion (60°F to 75°F seasonal range) while maintaining dimensional stability. Achieved zero adhesion failure and stair deflection <1mm over 18 months.
Toronto, ON3,800 sqftHard Maple (main floor) · White Oak (staircase treads)August 2, 2026Looking for the pictures rather than the measurements? Projects, photographed is completed work in chapters — the floor sanded to bare, then the same rooms after colour.
