Bona Edge UX
Edger with a sealed dust path.
What decides whether it runs
Electrical requirement
| Supply | 230 V / 50 Hz, 1 phase |
|---|---|
| Power | 1.25 kW |
| Current | not published |
| Minimum fuse | 10 A |
| Connector | none specified |
Bona publishes no North American configuration for this machine. That is a gap in the source material, not a statement that one does not exist.
The rest of it
Mechanical
| Category | edger |
|---|---|
| Weight | 14.4 kg |
| Drum or disc | 178 mm |
| Speed | 3000 rpm |
| Abrasive | 178 mm disc |
| Dust | on board bag |
The part other spec pages leave out
What Bona does not publish
- A North American configuration. The data sheet publishes 230 V / 50 Hz only.
- A price. No manufacturer in this category publishes one, so this page shows none.
- Any productivity figure. There is no manufacturer-published square-feet-per-hour rating for this machine, so there is nothing here to quote.
Where its own documents disagree
- The older Bona Edge sheet gives 2.0 kW; the Edge UX sheet gives 1.25 kW. Ten years apart and different machines, but worth knowing before assuming they are interchangeable.
Both values are shown rather than one being chosen. Picking a side would be inventing certainty the source material does not contain.
Next
Put it on a circuit
The circuit planner takes this machine and whatever else would be running beside it and does the arithmetic against the breaker you actually have.