Bona Power Drive
Sixteen-inch driven buffer for finish abrasion and between-coat work.
What decides whether it runs
Electrical requirement
| Supply | 240 V / 60 Hz, 1 phase |
|---|---|
| Power | 2.5 HP |
| Current | not published |
| Minimum fuse | 16 A |
| Connector | none specified |
| Supply | 230 V / 50 Hz, 1 phase |
|---|---|
| Power | 1.9 kW |
| Current | 11 A |
| Minimum fuse | 16 A |
| Connector | none specified |
The rest of it
Mechanical
| Category | buffer |
|---|---|
| Weight | 51 kg |
| Drum or disc | 407 mm |
| Speed | 147 rpm |
| Abrasive | One 16 in drive plate, or four 150 mm discs |
| Dust | requires external |
The part other spec pages leave out
What Bona does not publish
- kW for the North American configuration; Bona publishes horsepower there and kW in Europe.
- A price. No manufacturer in this category publishes one, so this page shows none.
- Any productivity figure. There is no manufacturer-published square-feet-per-hour rating for this machine, so there is nothing here to quote.
Where its own documents disagree
- The European FlexiSand 1.9 sheet gives 50 kg; the North American Power Drive sheet gives 112 lb (51 kg). Close, and from two documents about closely related machines.
Both values are shown rather than one being chosen. Picking a side would be inventing certainty the source material does not contain.
Next
Put it on a circuit
The circuit planner takes this machine and whatever else would be running beside it and does the arithmetic against the breaker you actually have.