Lägler HUMMEL
The main belt sander for taking a floor to bare wood.
What decides whether it runs
Electrical requirement
| Supply | 220 V / 60 Hz, 1 phase |
|---|---|
| Power | 2.9 kW |
| Current | not published |
| Minimum fuse | not published |
| Connector | none specified |
| Supply | 230 V / 50 Hz, 1 phase |
|---|---|
| Power | 2.2 kW |
| Current | not published |
| Minimum fuse | 16 A |
| Connector | none specified |
The rest of it
Mechanical
| Category | belt sander |
|---|---|
| Weight | 79 kg |
| Drum or disc | 200 mm |
| Speed | 2400 rpm |
| Abrasive | 200 × 750 mm belt |
| Dust | on board bag |
The part other spec pages leave out
What Lägler does not publish
- Horsepower — Lägler publishes kW only.
- Current draw — the product page gives a minimum fuse rating, not amps.
- Working width, as distinct from the 200 mm drum width.
- The North American weight; 79 kg is the European figure.
- A price. No manufacturer in this category publishes one, so this page shows none.
- Any productivity figure. There is no manufacturer-published square-feet-per-hour rating for this machine, so there is nothing here to quote.
Next
Put it on a circuit
The circuit planner takes this machine and whatever else would be running beside it and does the arithmetic against the breaker you actually have.