Lägler TRIO
Three-disc machine for flattening and for finish sanding without drum marks.
What decides whether it runs
Electrical requirement
| Supply | 220 V / 60 Hz, 1 phase |
|---|---|
| Power | 1.8 kW |
| Current | not published |
| Minimum fuse | not published |
| Connector | none specified |
| Supply | 230 V / 50 Hz, 1 phase |
|---|---|
| Power | 1.8 kW |
| Current | not published |
| Minimum fuse | 16 A |
| Connector | none specified |
The rest of it
Mechanical
| Category | multi disc sander |
|---|---|
| Weight | 76 kg |
| Drum or disc | 200 mm × 3 |
| Speed | 600 rpm |
| Abrasive | 200 mm discs, three of them |
| Dust | on board bag |
The part other spec pages leave out
What Lägler does not publish
- Working width. Lägler publishes disc diameter and disc count only — the commonly quoted 340 mm is not a Lägler figure.
- Horsepower, and current draw.
- A price. No manufacturer in this category publishes one, so this page shows none.
- Any productivity figure. There is no manufacturer-published square-feet-per-hour rating for this machine, so there is nothing here to quote.
Next
Put it on a circuit
The circuit planner takes this machine and whatever else would be running beside it and does the arithmetic against the breaker you actually have.