Lägler UNICO
Edge sander, offered in both 110 V and 220 V North American forms.
What decides whether it runs
Electrical requirement
| Supply | 110 V / 60 Hz, 1 phase |
|---|---|
| Power | 1.1 kW |
| Current | not published |
| Minimum fuse | 10 A |
| Connector | none specified |
| Supply | 230 V / 50 Hz, 1 phase |
|---|---|
| Power | 1.1 kW |
| Current | not published |
| Minimum fuse | 10 A |
| Connector | none specified |
The rest of it
Mechanical
| Category | edger |
|---|---|
| Weight | 20 kg |
| Drum or disc | 178 mm |
| Speed | 2700 rpm |
| Abrasive | 178 mm disc |
| Dust | not published |
The part other spec pages leave out
What Lägler does not publish
- Dust extraction arrangement is not stated on the product page.
- A price. No manufacturer in this category publishes one, so this page shows none.
- Any productivity figure. There is no manufacturer-published square-feet-per-hour rating for this machine, so there is nothing here to quote.
Next
Put it on a circuit
The circuit planner takes this machine and whatever else would be running beside it and does the arithmetic against the breaker you actually have.